1-800-Pet-Edge
 |
 |
 |
Andis UltraEdge Clipper Blade Size T-84
Andis® UltraEdge™ Clipper Blades are made from carbon-infused steel for a harder cutting surface that lasts longer. This size T-84 Extra Wide dog clipper blade has a 3/16" blade cut (2.4 mm). Use for stripping large dogs and livestock.
Item #AD21641
ONLY
$19.65
 |
|
Andis® UltraEdge™ blades are made from high-carbon steel and processed through a unique carburizing heat treatment that actually adds carbon to the metal. More carbon on the metal means a harder cutting surface. Blades hold a razor-sharp edge that will endure prolonged use and more sharpening treatments.
- Each Andis Ultra Edge Blade is sharpened to exact quality standards
- Hand-tested before it is shipped
- Rockwell Hardness rating of 65
Fit Andis®, Conair®, Oster®, and Wahl® detachable-style clippers.
Not sure what blade size you need? View our clipper blade sizing chart
See the Specifications tab for product details.
Material: Carbon-infused Steel
Cut: Size T-84 Blade has a 3/16" Blade Cut
Rockwell Hardness Rating: 65
See the Instructions tab for more product information.
Cut: Size T-84 Blade has a 3/16" Blade Cut
Rockwell Hardness Rating: 65
See the Instructions tab for more product information.
Blade sets should be oiled once a day minimum! Ideally, before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil from external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be hair trapped between the upper and lower blade. Remove the blade from the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be hair trapped between the upper and lower blade. Remove the blade from the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Customers who purchased this item also purchased...
|
|
|
Similar Items
|
|
|
