1-800-Pet-Edge
 |
 |
 |
Oster Elite CryogenX Clipper Blade Size 5 Skip
Oster® Elite CryogenX™ clipper blades offer superior hardness for the best in performance and value. The Oster® Elite CryogenX™ Clipper Blade Size 5 Skip-Tooth blade has a 1/4" blade cut.
Item #OS88005
ONLY
$33.45
 |
|
Oster® Elite CryogenX™ Blades are cryogenically treated and coated with titanium carbonitride to create a slick surface that maneuvers smoothly through coats with minimal effort.
- Rockwell Hardness rating of 82+
- Blades hold a sharper edge for superior performance
- Endure more sharpening treatments over time
- Blades stay 30% cooler for maximum performance
Compatible with Andis®, Conair®, Oster®, and Wahl® detachable-style clippers.
Not sure what blade size you need? View our clipper blade sizing chart
See the Specifications tab for product details.
Material: Steel with Antimicrobial Coating (Silver Series)
Cut: Size 5 Skip-Tooth blade has a 1/4" blade cut
Rockwell Hardness Rating: 82+
See the Instructions tab for more product information.
Cut: Size 5 Skip-Tooth blade has a 1/4" blade cut
Rockwell Hardness Rating: 82+
See the Instructions tab for more product information.
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Customers who purchased this item also purchased...
|
|
|
Similar Items
|
|
