1-800-Pet-Edge
 |
 |
 |
Guardian Gear Elevated Pet Cots w/Mesh Panels
Guardian Gear® Pet Cots with Mesh Panels are an update of our best-selling pet cots. Easy to assemble pet cot keeps pets elevated above hot surfaces. Each pet cot includes a UV-resistant polyester cover with a large mesh center panel.
Item #ZW6008
AS LOW AS
$18.99
 |
|
Our best-selling Guardian Gear® Pet Cots are now available in a more breathable design to keep pets extra comfortable in hot weather.
- Lightweight steel frame cot includes a UV-resistant polyester cover with mesh center panels
- Sets up and breaks down in seconds
- Great for traveling, camping, or naps in the backyard
See the Specifications and Instructions tabs for product details.
Material: Steel frame, 600D Polyester cover with a PVC mesh panel in the center
Size:
Frame: Wipe clean with a damp cloth.
Cover: Remove cover from frame. Machine wash in cold water. Tumble dry on low heat.
See the Instructions tab for more product details.
Size:
- Small cot measures 24"L X 18"W and has an 80 lb weight capacity
- Medium cot measures 30"L x 24"W and has a 100 lb weight capacity
- Large cot measures 36"L x 30"W and has a 120 lb weight capacity
- X-Large cot measures 48"L x 36"W and has a 150 lb weight capacity
Frame: Wipe clean with a damp cloth.
Cover: Remove cover from frame. Machine wash in cold water. Tumble dry on low heat.
See the Instructions tab for more product details.
- Download the instructions for the Small and Medium Cots
- Download the instructions for the Large Cot
- Download the instructions for the X-Large Cot
Alternate Assembly Instructions
- Set aside two Y-connectors and the canvas cover. They are not needed until later
- Assemble three sides of the frame. The three sides MUST be one long side (which the cover will later be Velcroed around) and two shorter end pieces (the parts that slip into the pre-sewn ends of the cover).
- Once three sides of the frame have been assembled, slip the cover over the short bars. This is easiest when the long side bar is placed on the floor with the ends sticking up, as you can use your foot to hold the frame steady. Note: poles may need to be flexed slightly when inserted into the canvas. Please slide cover onto the frame as evenly as possible, as pulling only one end of the canvas down too far will cause the other end to be overly tight and difficult to move. DO NOT VELCRO CANVAS
- Attach third Y-connector to one of theshort end pieces. Attach long side (all components of the long side if dealing with the larger cots) to that Y-connector.
- Place last Y-connector on long side. It MUST be placed on the long side, not the short one, due to the fact that the short end pieces are confined by the canvas and do not have as much maneuverability.
- Insert short end piece into Y-Connector, pulling long side bar to the side in order to accommodate. Once bar is fully inserted into Y-Connector, Velcro canvas around the long sides of the cot and attach all four legs to the Y-Connectors. If the canvas won’t stretch enough to fit, check to be sure all bars are fully inserted into position and the cover is centered. Partial insertion and/or and/or an off-center cover will affect fit.
Customers who purchased this item also purchased...
|
|
|
Similar Items
|
|
|
