1-800-Pet-Edge
 |
 |
 |
Andis UltraEdge Clipper Blade Size 10
Andis® UltraEdge™ Clipper Blades are made from carbon-infused steel for a harder cutting surface that stays sharper longer. Size 10 dog clipper blades have a 1/16" blade cut (1.5 mm) that’s ideal for underbelly work, terrier ears, and poodle faces.
Item #AD64071
ONLY
$15.69
 |
|
Andis® UltraEdge™ Clipper Blades are made from high-carbon steel and processed through a unique carburizing heat treatment that actually adds carbon to the existing metal producing a harder cutting surface. Blades hold a razor sharp edge that will endure prolonged use and more sharpening treatments.
- 1/16" blade cut (1.5 mm) — a good choice if a fairly close and smooth finish is desired
- Ideal for underbelly work, terrier ears, and poodle faces
- Often used for stripping coats when the mats are close to the skin
- A popular choice for groomers who are doing body work on schnauzers
Compatible with Andis®, Conair®, Oster®, and Wahl® detachable-style clippers.
Not sure what size you need? View our clipper blade sizing chart.
See the Specifications tab for product details.
Material: Carbon-infused Steel
Cut: Blade has a 1/16" blade cut
Rockwell Hardness Rating: 65
See the Instructions tab for more product information.
Cut: Blade has a 1/16" blade cut
Rockwell Hardness Rating: 65
See the Instructions tab for more product information.
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Customers who purchased this item also purchased...
|
|
|
Similar Items
|
|
|
