The Wahl® Ultimate Competition Series Blade
is a revolutionary blade designed for faster, smoother cutting.
- Made with updated tooth geometry for smoother feeding and faster cutting
- Cuts 2 1/2 times faster than Wahl® Competition Series blades
- Midnight color for easy reference
- Made in the USA
Each blade is hand-tested before leaving the production line.100% quality guaranteed to cut fur the first time! Fit Wahl® Switchblade, Storm, KM2 and most Andis® and Oster® detachable clippers. Available in 12 sizes detailed below.
View our clipper blade sizing chart
See the Specifications tab for product details.
: High carbon steel with silky, shiny black chrome finish
: Blades are available in the following sizes
- 7F blade has a 5/32" cut
- 10 blade has a 1/16" cut
- 10W blade has a 1/16" cut
- 15 blade has a 3/64" cut
- 30 blade has a 1/32" cut
- 40 blade has a 3/128" cut
- 50 blade has a 1/64" cut
- 7 Skip blade has a 5/32" cut
- 9 blade has a 5/64" cut
- 4F blade has a 5/16" cut
- 8.5 blade has a 1/8" cut
- 4 Skip blade has a 5/16" cut
See the Instructions tab for more product information.
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.