Oster® Elite CryogenX™ Clipper Blades
are designed to hold a sharper edge longer for superior performance.
- Rockwell Hardness rating of 82+
- Endure more sharpening treatments over time
- Stays 30% cooler for maximum performance. Large numbers on blades make identification easier
The Size 10 blade is highly effective for sanitary trimming (bellies, around eyes, rectum, and pads of feet) of any breed. For most close clipper work on poodles, spaniels, and terriers, the Size 10 blade is the blade of choice.
Cryogenically treated and coated with titanium carbonitride to create a slick surface that maneuvers smoothly through coats with minimal effort.
Compatible with Andis
®, and Wahl
® detachable-style clippers.
Not sure what blade size you need? View our clipper blade sizing chart
See the Specifications and Instructions tabs for product details.
Cut: Size 10 Blade has a 1/16" Blade Cut.
Rockwell Hardness Rating: 82+
See Instructions tab for more product details.
Blade Maintenance: Blade sets should be oiled once a day minimum! Ideally, oiling should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any excess oil off the external surfaces. This reduces the possibility of getting oil on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, some hair may still be trapped between the upper and lower blades. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.