1-800-Pet-Edge
 |
 |
 |
Andis 90th Anniversary Blade Pack 5/Pcs
A special offer from Andis®. The 90th Anniversary Blade Pack contains some of the most popular Andis pet clipper blades. This special set includes four UltraEdge™ blades plus a ShowEdge 7SE blade.
Item #AD22495
 |
|
Andis® 90th Anniversary Blade Pack is a great opportunity to start fresh with some of the best blades in the business. Andis® UltraEdge™ clipper blades hold a razor sharp edge that will endure prolonged use and more sharpening treatments. Andis® SHOWEdge Clipper Blades are engineered to require fewer passes through the coat.
- Each Andis blade is sharpened to exact quality standards
- Hand-tested before it is shipped
- Includes UltraEdge Size 10, 30, 4FC & 5FC, plus ShowEdge 7SE blade
Material: Chrome-plated carbon steel
Rockwell Hardness Rating: UltraEdge - 65; ShowEdge - 62
Contains One Each:
UltraEdge 4FC
UltraEdge 5FC
UltraEdge 10 90th Anniversary
UltraEdge 30
ShowEdge 7SE
See the Instructions tab for more product details.
Rockwell Hardness Rating: UltraEdge - 65; ShowEdge - 62
Contains One Each:
UltraEdge 4FC
UltraEdge 5FC
UltraEdge 10 90th Anniversary
UltraEdge 30
ShowEdge 7SE
See the Instructions tab for more product details.
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Customers who purchased this item also purchased...
|
|
|
