Andis CeramicEdge Coarse Replacement Blade Cutters

Andis® CeramicEdge Coarse Replacement Blade Cutters are made from a high-tech ceramic material to stay sharp longer and resist heat for cooler, more comfortable cutting.

Item #AD56115

ONLY
$11.97

High-quality Andis® CeramicEdge Coarse Replacement Blade Cutters stay sharper longer and require less sharpening than standard steel blades.

Low heat transfer and friction index keeps blades running 50% cooler than steel
Ceramic blades use less coolant and clip faster with less downtime
Ceramic blades do not heat up, reducing the risk of friction burns

Replacement Cutters are designed for use with Andis CeramicEdge Blades (sold separately). Coarse Ceramic Cutter can be used with #30, #15, #10, #9, #8 1/2, #7FC, #7, #5FC, #5, #4, #4FC and #3 3/4FC size blades.

For #40 and #50 blades, use the Medium Cutter.

See the Specifications tab for product details.

Material: Ceramic
Fit on the following Detachable Blades:
Coarse: 30, 15, 10, 9, 8-1/2, 7FC, 7, 5FC, 5, 4FC, 4, 3-3/4FC, 5/8HT and 3/4HT

See the Instructions tab for more product information.

Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.

Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.

Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.

Always replace broken or nicked blades to prevent injury.