1-800-Pet-Edge
 |
 |
 |
Andis Power Trim Blades
Keep your grooming operation working at full speed with replacement blades for the Andis® Power Trim Cordless Trimmer. These Andis® Power Trim Blades are available in #10 and #40 styles.
Item #AD32357
ONLY
$10.99
 |
|
These Andis® Power Trim Replacement Blades are designed for use with the Andis® Power Trim Cordless Trimmer.
- Blades made of high-quality stainless steel
- Long-lasting performance
- Square blade set is used for very close trimming
See the Specifications and Instructions tabs for more product details.
Material: Stainless steel
Cuts: #10: 1/16 In Cut Blade #40: 1/100 In Cut Blade
#30 style blade also available, sold separately.
See the Instructions tab for more product information.
Cuts: #10: 1/16 In Cut Blade #40: 1/100 In Cut Blade
#30 style blade also available, sold separately.
See the Instructions tab for more product information.
Care of Blades:
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Customers who purchased this item also purchased...
|
|
|
Similar Items
|
|
|
