1-800-Pet-Edge
 |
 |
 |
Andis UltraEdge Clipper Blade Size 7FC
Andis® UltraEdge™ Dog Clipper Blades are made from carbon-infused steel for a harder cutting surface that stays sharper longer. Size 7FC dog clipper blade has a 1/8" (3.2 mm) blade cut. This blade is ideal for a smooth finish after stripping.
Item #AD64121
ONLY
$17.39
 |
|
Andis® UltraEdge™ Dog Clipper Blades are made from high-carbon steel and processed through a unique carburizing heat treatment that actually adds carbon to the existing metal, producing a harder cutting surface. Blades hold a razor sharp edge that will endure prolonged use and more sharpening treatments.
- Sharpened to exact quality standards
- Hand-tested before it is shipped
- Rockwell Hardness rating of 65
Compatible with Andis®, Conair®, Oster®, and Wahl® detachable-style clippers.
Not sure what size you need? View our clipper blade sizing chart.
See the Specifications tab for product details.
Material: Carbon-infused Steel
Cut: 7FC Finish Blade has a 1/8" blade cut
Rockwell Hardness Rating: 65
Blades are available in the following styles:
Cut: 7FC Finish Blade has a 1/8" blade cut
Rockwell Hardness Rating: 65
Blades are available in the following styles:
- Size 50 Blade has a 1/125" Blade Cut
- Size 40 Blade has a 1/100" Blade Cut
- Size 30 Blade has a 1/50" Blade Cut
- Size 5/8 Toe Blade has a 1/32" Blade Cut
- Size 15 Blade has a 3/64" Blade Cut
- Size 10 Blade has a 1/16" Blade Cut
- Size 9 Blade has a 5/64" Blade Cut
- Size 8 1/2" Blade has a 7/64" Blade Cut
- Size 7 Skip Tooth Blade has a 1/8" Blade Cut
- Size 7F Finish Blade has a 1/8" Blade Cut
- Size 5 Skip Tooth Blade has a 1/4" Blade Cut
- Size 5F Finish Blade has a 1/4" Blade Cut
- Size 4 Skip Tooth Blade has a 3/8" Blade Cut
- Size 4 Finish Blade has a 3/8" Blade Cut
- Size 3 3/4" Skip Tooth Blade has a 1/2" Blade Cut
- Size 5/8 HT Blade has a 5/8" Blade Cut
Andis UltraEdge Clipper Blades leave a beautifully smooth look to the body and legs on a summer, Miami, or bikini clip. Many groomers use this blade for the top back work on a cocker spaniel. It leaves a longer, textured look when used for body work on a schnauzer with a thick, cottony coat. It can be used against the lay of a coat on the front of the poodle neck and also on the cheek area to help prevent abrasion on sensitive skin.
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Customers who purchased this item also purchased...
|
|
|
Similar Items
|
|
|
