1-800-Pet-Edge
 |
 |
 |
Conair Canine FX Palm Pro Micro Trimmer Replacement Blade
Keep your Palm Pro Micro Trimmer working at full speed with the handy Conair Canine FX Palm Pro Micro Trimmer Replacement Blade. Features a ceramic cutting edge for longer, cooler operation.
Item #CQ2152
 |
|
Replacement trimmer blades from PetEdge save you time and money! The handy Conair Canine FX Palm Pro Micro Trimmer Replacement Blade is designed to fit the Conair Canine FX Palm Pro Micro Trimmer.
- Perfect for working around the ears, nose, and paws
- Cool running, long lasting ceramic cutter.
- Will stay 50% cooler and last 50% longer than conventional blades
Material: Steel and ceramic
Conair Canine FX Palm Pro Micro Trimmer Replacement Blade
See the Instructions tab for more product information.
Conair Canine FX Palm Pro Micro Trimmer Replacement Blade
See the Instructions tab for more product information.
Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.
Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.
Always replace broken or nicked blades to prevent injury.
Customers who purchased this item also purchased...
|
|
|
