Oster CryogenX Clipper Blade Size 5F

Advanced Oster® Cryogen-X™ AgION® dog clipper blades feature high-carbon steel for added durability. The Oster® Cryogen-X™ Clipper Blade Size 5F leaves a 1/4" (6.3 mm) blade cut. Use as a finishing blade for a Size 5 Skip-Tooth.

Item #OS86855

ONLY
$24.69

Get a FREE Oster CryogenX #10 Blade with the purchase of a #3, 4, 5, 7, 3F, 4F, 5F, or 7F Oster CryogenX Blade.
A $20.65 Value!

Oster® Cryogen-X™ AgION® Clipper Blades are anufactured from fine-grain, high-carbon steel that is cryogenically treated so edges stay sharper longer.

American-made blades
Rockwell Hardness rating of 62
Stay ultra cool during operation for optimum durability.

Size 5F Blade has a 1/4" (6.3 mm) blade cut. Use for body work on terriers, poodles, lhasa, Shih Tzu. Large numbers on blades make identification easier.

Compatible with Andis®, Conair®, Oster®, and Wahl® detachable-style clippers.

Not sure what blade size you need? Download our clipper blade sizing chart

See the Specifications tab for product detail.

Material: Steel
Cut: Size 5F Blade has a 1/4" blade cut
Rockwell Hardness Rating: 62

Blades are available in the following styles:

Size 50 Blade has a 1/125" Blade Cut
Size 40 Blade has a 1/100" Blade Cut
Size 30 Blade has a 1/50" Blade Cut
Size 5/8 Toe Blade has a 1/32" Blade Cut
Size 15 Blade has a 3/64" Blade Cut
Size 10 Blade has a 1/16" Blade Cut
Size 9 Blade has a 5/64" Blade Cut
Size 8 1/2" Blade has a 7/64" Blade Cut
Size 7 Skip Tooth Blade has a 1/8" Blade Cut
Size 7F Finish Blade has a 1/8" Blade Cut
Size 5 Skip Tooth Blade has a 1/4" Blade Cut
Size 5F Finish Blade has a 1/4" Blade Cut
Size 4 Skip Tooth Blade has a 3/8" Blade Cut
Size 4 Finish Blade has a 3/8" Blade Cut
Size 3 3/4" Skip Tooth Blade has a 1/2" Blade Cut
Size 5/8 HT Blade has a 5/8" Blade Cut

See the Instructions tab for more product information.

Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal’s coat. If the clipper blades leave streaks or slow down, it’s a sure sign that the blades need oil.

Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.

Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.

Always replace broken or nicked blades to prevent injury.