Geib Buttercut Dog Clipper Blades
with the same care and quality as the incomparable Geib Shears.
Made of premium-quality, high-carbon German steel to cut
precisely and cleanly for superior results.
- Rockwell hardness is 70
- Edges stay ultra-sharp longer
- Lasting performance and durability
See how to remove and attach an A5-compatible clipper
Compatible with all A5 style detachable blade clippers.
Blades are available in the styles listed below.
: Stainless steel
Rockwell Hardness Rating
Blades are available in the following
- Size 50 Blade has a 1/125" Blade Cut
- Size 40 Blade has a 1/100" Blade Cut
- Size 30 Blade has a 1/50" Blade Cut
- Size 5/8 Toe Blade has a 1/32" Blade Cut
- Size 15 Blade has a 3/64" Blade Cut
- Size 10 Blade has a 1/16" Blade Cut
- Size 9 Blade has a 5/64" Blade Cut
- Size 8 1/2" Blade has a 7/64" Blade Cut
- Size 7 Skip Tooth Blade has a 1/8" Blade Cut
- Size 7F Finish Blade has a 1/8" Blade Cut
- Size 5 Skip Tooth Blade has a 1/4" Blade Cut
- Size 5F Finish Blade has a 1/4" Blade Cut
- Size 4 Skip Tooth Blade has a 3/8" Blade Cut
- Size 4 Finish Blade has a 3/8" Blade Cut
- Size 3 Skip Tooth Blade has a 1/2" Blade Cut
- Size 3F Finish Blade has a 1/2" Blade Cut
- Size 16mm Blade has a 5/8" Blade Cut
- Size 19mm Blade has a 3/4" Blade Cut
- Size 25mm Blade has a 1" Blade Cut
Blade sets should be oiled once a day minimum, when used!
Ideally, it should be done before every grooming. After oiling,
be sure to use a soft, dry cloth to wipe any oil off the
Place a few drops of blade oil
on the front and side of the cutter blades. Wipe excess oil off
blades with a soft, dry cloth. Spray lubricants contain
insufficient oil for good lubrication, but are an excellent
clipper blade coolant.
Immerse blades only while
clipper is running in a shallow pan of clipper oil or blade
cleaner. After cleaning, turn the clipper off and dry blades
with a clean, dry cloth. If blades will still not cut, there
may still be some hair trapped between the upper and lower
blade. Remove the blade off the clipper and slide the upper
blade to one side without loosening the tension spring or
moving the upper blade completely out from under the tension
spring. Wipe the surfaces of the blades clean with a dry cloth,
then place a drop of clipper oil where the upper and lower
blades meet and also in the guide slot of the tension
Always replace broken or nicked blades to prevent injury.